Product Description:
High-Quality Polyurethane foam recommended for use in construction projects for windows and door installation and gap filling.
At the maximum yield, it allows fillings 22 running meters of gaps or installing 4 windows of a standard size.
• Its regular and stable structure provides high-quality installation as well as excellent waterproofing and insulation properties. Immediate expansion guarantees precise filling and strong adhesion. Product recommended for application conditions where relative humidity is higher than 60%.
• Tested at 50% relative humidity and 23°C. Running meters calculated for a standard joint: width:3cm, depth: 6cm.
Features:
Can Temperature: from +10°C to +30°C
Ambient Temperature: from +5°C to +30°C
Expansion rate: up to 78 times
Optimal temperature for application: from +18°C to +90°C
Cutting time: from 40 to 60 min
*In standard conditions of 23°C and 50% humidity.
Application Instruction:
1- Clean, degrease and dampen the surface with water.
2- Shake the can for 30 seconds and screw it onto gun. Keep the can upside down during application.
3- Slowly apply in the gap from buttom to top in side-to-side movements. Fill 70% of the gap.
4- Wait 40 to 60 min and cut the foam excess.
5- Protect the foam against UV radiation with silicone, plater or paint (not sooner than 24H after application).

WD-40 protects metal from rust and corrosion, penetrates stuck or jammed parts, displaces moisture, and lubricates just about anything. WD-40 is also great when it comes to cleaning grease, grime, and other marks from most surfaces.

The Five Basic Functions:

CLEANS: WD-40 gets under dirt, marks and grease, making it easy to wipe them away. It also dissolves adhesives, allowing the easy removal of labels, tape, and stickers

PROTECTS: WD-40 protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements

LUBRICATES: WD-40’s lubricating ingredients are widely dispersed, and hold firmly to all moving parts

PENETRATES: WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts

DISPLACES MOISTURE: Because WD-40 displaces moisture, it quickly dries out electrical systems to eliminate moisture-induced short circuits (Remember to turn the power off before you spray)