10 profiles. 2 crosses. 1 key. All common locking systems. Multifunctional key for the actuation of locking systems from the areas of facilities engineering (heating and sanitation, air conditioning, electro technology), gas and water supply and shut-off-systems. 8-arm version: two 4-way spider keys connected in a space-saving way using magnets. Reversible bit: 1,0 x 7 mm slot and PH2 cross slot. Key and reversible bit joined by stable stainless steel wire. Quality surface coating. Weight-optimised zinc die-cast design.
KNIPEX® Dismantling Knife with guide shoe VDE 180 mm
Solid, fixed hook blade, sickle shaped. With guide shoe at the blade point. No damage of the conductor insulation. Blade made of stainless steel, vacuum hardened. Ergonomically shaped insulating handle. Transparent protective cap. VDE tested according to DIN EN/IEC 60900 : 2004. Ergonomically designed handle shape with comfortable slip guard. Particularly confident grip thanks to slip-proof soft components. Thumb recess and “finger hook” at the end of the handle ensure a good transmission of force when the blade is pulled.
KNIPEX® Cable Knife VDE 190 mm
Solid, fixed straight blade. Blade oil-hardened and tempered. Ergonomically shaped insulating handle. Transparent protective cap. VDE tested according to DIN EN/IEC 60900 : 2004. Ergonomically designed handle shape with comfortable slip guard. Particularly confident grip thanks to slip-proof soft components. Thumb recess and “finger hook” at the end of the handle ensure a good transmission of force when the blade is pulled. blade: special tool steel, oil-hardened
narrow handle width and improved ergonomics For crimping wire end sleeves according to DIN 46228 parts 1 + 4. For solder-free electrical connections. Lateral access of the wire end sleeves into the tool. Simple handling as a result of self-adjustment to the size of the end sleeve (ferrule). Repetitive, high crimping quality due to integral lock (self-releasing mechanism). Tools have been set precisely (calibrated) in the factory. Optimum transmission of force due to lever action for fatigue-reduced operation. Handy shape and low weight provide high operation comfort. Expanded capacity of hexagonal crimping up to 10 mm². Hexagonal compression for confined connection dimensions. Suitable in particular for all twin wire end sleeves up to 2 x 4 mm² or 2 x AWG 10. Chrome vanadium electric steel in special quality, oil-hardened
narrow handle width and improved ergonomics For crimping wire end sleeves according to DIN 46228 parts 1 + 4. For solder-free electrical connections. Lateral access of the wire end sleeves into the tool. Simple handling as a result of self-adjustment to the size of the end sleeve (ferrule). Repetitive, high crimping quality due to integral lock (self-releasing mechanism). Tools have been set precisely (calibrated) in the factory. Optimum transmission of force due to lever action for fatigue-reduced operation. Handy shape and low weight provide high operation comfort. Square compression now additionally also for wire end sleeves up to 16 mm². Square compression for ideal contact surfaces in the clamp connection. Suitable in particular for all twin wire end sleeves up to 2 x 6 mm² or 2 x AWG 8. Chrome vanadium electric steel in special quality, oil-hardened
For solder-free electrical connections. Repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism). Tools have been set precisely (calibrated) in the factory. High transmission of force thanks to lever action for fatigue-reduced working. Good handling thanks to favourable handle position, low weight, compact design and ergonomically shaped handles. Chrome vanadium electric steel in special quality, oil-hardened
Professional tool for cutting and stripping unshielded ribbon telephone cables. For crimping 6- and 8-pole Western plugs type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width). Exact crimping process due to parallel crimping. Repetitive, high crimping quality due to integral lock (self-releasing mechanism). Optimum transmission of force due to lever action for fatigue-reduced operation. With length cutter and stripping knife for ribbon cables 6 and 12 mm length. With additional stripping device for round cables. Head burnished, two-colour dual component handles. Chrome vanadium electric steel in special quality, oil-hardened
Set composed of pliers and quick changer magazine for current crimping requirements. For solder-free electrical connections. Repetitive, high crimping quality due to precision dies and integral lock with very fine adjustment (self-releasing mechanism). Tools have been set precisely (calibrated) in the factory. Ergonomically shaped two-colour dual component handles for one and two-hand operation. Very easy and quick change of crimp profiles. No additional tools required. Interchangeable profiles are securely held in the tool. Secure and dirt-proof storage of the interchangeable profiles in a round magazine. Round magazine with practical belt clip – interchangeable profiles are always ready to hand. Chrome vanadium electric steel in special quality, oil-hardened. Round magazine: plastic, fibreglass-reinforced.
For cutting copper and aluminium single conductors as well as multiple stranded cables. Not suitable for steel wire and wire ropes. Precision-ground, hardened blades. Clean and smooth cut without crushing and deformation. One-hand operation using ratchet principle. Little handforce required due to very high transmission ratio. Two-stage ratchet drive for easy cutting. Simple handling as a result of low weight and compact design – can be used even in confined areas. With guard. fixed handle with support area for putting down the pliers when cutting High-grade special tool steel, forged, oil-hardened
Good access to the workpiece due to slim size of head and joint area. More output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacity. Box-joint design for high stability due to double guide. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Guard prevents operators’ fingers being pinched. Favourable lever action: optimum transmission of force. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Chrome vanadium electric steel, forged, multi stage oil-hardened
Push the button for adjustment on the workpiece: fast and comfortable handling. Fine adjustment: ensures optimum adjustment to differently sized workpieces and user-friendly handle position. Reliable catching of the hinge bolt: no unintentional shifting. Box-joint design for high stability due to double guide. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. One-hand adjustment. Guard prevents operators’ fingers being pinched. Favourable lever action: optimum transmission of force. Chrome vanadium electric steel, forged, multi stage oil-hardened
The unique installation tool now also in 400 mm length. For opening widths up to 85 mm / 3 3/8″. For large screw joints also with pressure-sensitive surfaces such as plastic, copper, brass, stainless steel and chrome. Adjustable tightening tool. Replaces diverse expensive, large open-end wrenches up to AF 85 mm or 3 3/8″. Also excellent for gripping, holding, pressing and bending workpieces. Smooth jaws, for damage free installation of quality union joints made from brass, red brass or stainless steel. Zero backlash jaw pressure prevents damage to edges of sensitive components. Push the button for adjustment on the workpiece. Parallel jaws give a more solid grip. Its design allows flexible adjustment of all widths up to the specified maximum size. Optimised adjustment to the workpiece with hand-friendly position of grips. Reliable catching of the hinge bolt: no unintentional shifting. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power. Chrome vanadium electric steel, forged, oil-hardened
