1/2″ Air Impact Wrench
Introduction
* Maximum torque of 800 N·m
* Downward exhaust design
* Prolonged service life
Product No 01113C
Net Weight(kg) 2.58
Air Inlet Size 1/4″
Minimum endotracheal diameter(mm) 10
Working air pressure(KGF/CM2) 6.35
Vibrancy(M/S2) 12
Output specification 1/2″square-head
Operating torque(N·M) 400-650
Maximum reverse torque(N·M) 800
Idle speed(RPM) 7500
Tightening bolt capacity M20
Average air consumption(CFM) 4.2
Noise level dB(A) 110
Length(mm) 192
Width(mm) 195
Height(mm) 69
Special note: Noise level is A sound pressure level. Working pressure refers to the dynamic pressure measured at the product inlet when the product is idling. Tightening bolt capacity refers to standard torque that meets the specifications of DIN267 grade 8.8 bolts
Wheel Size: 5 inch
Spindle Thread: 3/8”-24, M10x1.25, M10x1.5 Air
Max Speed: 11,000 RPM at 90 PSI pressure
Net Weight: 1.8kgs
Length: 235mm
Average Air Consumption: 5 CFM
Air Inlet: 1/4” NPT (PT)
Air Hose I.D: 3/8” (10 mm) I.D
Sound Power db: 94.5dBA
Vibration: 2.293m/s²
Origin: Taiwan
Model No. 01111
Product size length (CM) 12.5
Product size height(CM) 17.7
Product size width(CM) 5.78
* Net weight 1.5 kg
* product description:
* Torque: 625 Nm
* Compact pneumatic wrench, total length 125mm
* High speed, high impact frequency
Introduction
? Maximum output torque of 4000 N· m, and tightening torque of S55
? Suitable for the removal and installation of tires of heavy trucks and large passenger vehicles as well as the removal, installation and repair of heavy-duty vehicle chassis and large mechanical equipment.
? Main parts made through the vacuum thermal treatment and ultra-low temperature quenching, featuring high hardness, toughness and wear resistance and long service life.
? Light weight, effectively reducing the labor intensity
Product No 01133
Idle speed?RPM? 4000
Tightening bolt capacity M36
Output shaft length 9″
Average air consumption?CFM? 16
Noise level dB?A? 110
Length?mm? 623
Width?mm? 140
Height?mm? 176
Net Weight?kg? 16.8
Air Inlet Size 1/2″
Minimum endotracheal diameter?mm? 12.5
Working air pressure?KGF/CM2? 8
Special note Noise level is A sound pressure level. Working pressure refers to the dynamic pressure measured at the product inlet when the product is idling. Tightening bolt capacity refers to standard torque that meets the specifications of DIN267 grade 8.8 bolts
Output specification 1″square-head
Operating torque?N·M? 3000
Maximum reverse torque?N·M? 4000
أسترو – مجلاخ زاوية هوائي 7 بوصة مع ذراع رفع للسلامة
