The RHINO R.100 magnetic core drilling machine cuts holes up to 100 mm and is particularly suitable for tapping. This magnetic core drilling machine has an extremely powerful 1800 W motor with a four-speed gearbox. The R.100 drilling machine benefits from a right/left rotating functionality and electronic speed adjustment.
ANNULAR CUTTERS Ø 12 100 mm Ø 1/2? 13 15/16?
TWIST DRILLS Ø 1 31.75 mm Ø 1/16? 1 1/4?
THREADING M3 M30 1/8? 1 3/16?
COUNTERSINKING Ø 10 105 mm Ø 3/8? 4 1/8?
LENGTH 340 mm 13 3/8?
WIDTH 310 mm 12 3/16?
HEIGHT 510 710 mm 20 1/16? 27 15/16?
STROKE 260 mm 10 1/4?
WEIGHT 28 kg 61.7 lbs
MAGNET (L x W x H) 220 x 110 x 64 m 8 11/16? x 4 5/16? x 2 1/2?
MAGNETIC FORCE 2,500 kg 5,512 lbs
MOTOR POWER 1,800 W 16.4 A
TOTAL POWER 1,950 W 17.7 A
SPEED (no load) (I) 40 110 rpm (II) 65 180 rpm (III) 140 380 rpm (IV) 220 610 rpm
SPEED 1,800 W (loaded) (I) 85 rpm (II) 152 rpm (III) 270 rpm (IV) 480 rpm
SPINDLE WELDON MT3 19.05 mm MT3 3/4?
POWER SOURCE 220 240V AC / 50 60 Hz
Additional information
Weight 28 kg
UoM PCS
MADE IN CHINA
Wattage 1800 W
Length (MM) 340
Width (MM) 310
Height (MM) 510 710
Power Input 220-240V 50-60Hz
ANNULAR CUTTERS Ø 12 35 mm Ø 7/16 1 3/8?
TWIST DRILLS Ø 1 13 mm Ø 1/16 1/2?
COUNTERSINKING Ø 10 35 mm Ø 3/8 1 3/8?
LENGTH 275 mm 10 13/16?
WIDTH 175 mm 6 7/8?
HEIGHT 293 383 mm 11 9/16 15 1/16?
STROKE 90 mm 3 9/16?
WEIGHT 8.5 kg 18.7 lbs
MAGNET (L x W x H) 160 x 81 x 36 mm 6 5/16 x 3 1/8 x 1 7/16?
MAGNETIC FORCE 1,000 kg 2,205 lbs
MOTOR POWER 850 W 7.7 A
TOTAL POWER 900 W 8.2 A
SPEED (no load) 750 rpm
SPEED (loaded) 400 rpm
SPINDLE (Weldon) 19.05 mm 3/4?
POWER SOURCE 220 240V AC / 50 60 Hz
Additional information
Weight 8.5 kg
UoM PCS
MADE IN CHINA
Wattage 850 W
Length (MM) 265
Width (MM) 175
Height (MM) 293-383
Power Input 220-240V 50-60Hz
ANNULAR CUTTERS Ø 12 50 mm Ø 7/16 2?
TWIST DRILLS Ø 1 20 mm Ø 1/16 13/16?
COUNTERSINKING Ø 10 50 mm Ø 3/8 2?
LENGTH 320 mm 12 5/8?
WIDTH 200 mm 7 7/8?
HEIGHT 378 533 mm 14 29/32 21?
STROKE 155 mm 6 3/32?
WEIGHT 13.5 kg 29.8 lbs
MAGNET (L x W x H) 168 x 84 x 42 mm 6 5/8 x 3 5/16 x 1 5/8?
MAGNETIC FORCE 1,600 kg 3,527 lbs
MOTOR POWER 1,200 W 10.0 A
TOTAL POWER 1,250 W 10.4 A
SPEED (no load) (I) 380 rpm (II) 690 rpm
SPEED (loaded) (I) 235 rpm (II) 425 rpm
SPINDLE WELDON 19.05 mm 3/4?
POWER SOURCE 220 240V AC / 50 60 Hz
Additional information
Weight 13.5 kg
UoM PCS
MADE IN CHINA
Wattage 1250 W
Length (MM) 245
Width (MM) 160
Height (MM) 385-550
Power Input 220-240V 50-60Hz
Rated power 650 W
Amperage at voltage 220-230 V 3 A
No-load speed 0-1800 min?¹
Impact rate 0-5800 min?¹
Single impact power 1,7 J
Chuck type SDS-PLUS
Drilling output in concrete 20 mm
Drilling output in steel 13 mm
Drilling output in wood 40 mm
Weight 2.4 kg
Product Description:
High-Quality Polyurethane foam recommended for use in construction projects for windows and door installation and gap filling.
At the maximum yield, it allows fillings 22 running meters of gaps or installing 4 windows of a standard size.
Its regular and stable structure provides high-quality installation as well as excellent waterproofing and insulation properties. Immediate expansion guarantees precise filling and strong adhesion. Product recommended for application conditions where relative humidity is higher than 60%.
Tested at 50% relative humidity and 23°C. Running meters calculated for a standard joint: width:3cm, depth: 6cm.
Features:
Can Temperature: from +10°C to +30°C
Ambient Temperature: from +5°C to +30°C
Expansion rate: up to 78 times
Optimal temperature for application: from +18°C to +90°C
Cutting time: from 40 to 60 min
*In standard conditions of 23°C and 50% humidity.
Application Instruction:
1- Clean, degrease and dampen the surface with water.
2- Shake the can for 30 seconds and screw it onto gun. Keep the can upside down during application.
3- Slowly apply in the gap from buttom to top in side-to-side movements. Fill 70% of the gap.
4- Wait 40 to 60 min and cut the foam excess.
5- Protect the foam against UV radiation with silicone, plater or paint (not sooner than 24H after application).
Rated power 600 WAmperage at voltage 220-230 V 2.8 A
Rated speed 12000-33000 min?¹
Number of RPM stages 6
Spindle inner diameter 10 mm
Collet diameter 6 mm
Weight 1,75kg
الطاقة المُقدّرة- 2600 واط
السرعة المُقدّرة -8000 دقيقةˉ¹
التيار الكهربائي- 220-230 فولت
الحد الاقصى لقطر قرص القطع- 180 مم / 7 بوصة
الحد الاقصى لقطر قرص الجلخ – 180 مم / 7 بوصة
الوزن- 5.3 كجم
6 أشهر ضمان استبدال
سنتين ضمان اصلاح
نوع البطارية: ليثيوم-أيون
جهد البطارية: 21 فولت
السرعة المُقدّرة -10000 دقيقةˉ¹
سعة البطارية -4.0 آمبير
وقت الشحن: -100 دقيقة
الأعلى. قطر قرص القطع -125 مم / 5 بوصة
الحد الاقصى لقطر قرص الجلخ- 125 مم / 5 بوصة
الوزن- 1.9 كجم
6 أشهر ضمان استبدال
سنتين ضمان اصلاح
Consistent Cutting *High performance by free cutting
Processed by safety concerns
Best product with a moderate cost for professional works with excellent performance.
Aramco Approved #10047173
PRODUCT CODE: 17711
PRODUCT USAGE: CUTTING
PRODUCT DIMENSION: 350 x 3.2 x 25.4 mm
DAIMETER: 350 mm
THICKNES: 3.2 mm (With allowable Tolerance as per Standard)
Hole: 25.4 mm
PRODUCT WEIGHT: 655 gm (With allowable Tolerance as per Standard)
PRODUCT TYPE: TYPE 41
PRODUCT SHAPE DESCRIPTION: FLAT STATIONARY CUTTING WHEEL
MAXIMUM OPERATING SPEED: 80 m/s
MAXIMUM REVOLUTION: 4400 U/min
PRODUCT SUITABILITY: METAL/CARBON STEEL
INDUSTRIAL SUITABILITY OF PRODUCT: FOUNDRY, SITE CONSTRUCTION, SHIPYARD, PIPE CONSTRUCTION, FABRICATION
STANDARD FOLLOWING FOR ABRASIVE MARKING: EN12413
Rated power (stage I / II / III) 60 / 60-2000 / 120-2000 W
Amperage at voltage 220-230 V 8.7 A
Temperature (stage I / II / III) 50 / 50-600 / 50-600 °C
Airflow (stage I / II / III) 250 / 250 / 500 l/min
Weight 0,9 kg
Rated power 550 W
Amperage at voltage 220-230 V 2.4 A
Stroke rate at no-load 700-3000 min?¹
Stroke length 18 mm
Cutting ability in wood 65 mm
Cutting ability in aluminum 10 mm
Cutting ability in steel 6 mm
Max. angularity of the body (left / right) 45° / 45°
Weight 1,9 kg
