SATA, 1/2″ Drive Air Impact Wrench 800 nm

1/2″ Air Impact Wrench
Introduction
* Maximum torque of 800 N·m
* Downward exhaust design
* Prolonged service life

Product No 01113C
Net Weight(kg) 2.58
Air Inlet Size 1/4″
Minimum endotracheal diameter(mm) 10
Working air pressure(KGF/CM2) 6.35
Vibrancy(M/S2) 12
Output specification 1/2″square-head
Operating torque(N·M) 400-650
Maximum reverse torque(N·M) 800
Idle speed(RPM) 7500
Tightening bolt capacity M20
Average air consumption(CFM) 4.2
Noise level dB(A) 110
Length(mm) 192
Width(mm) 195
Height(mm) 69
Special note: Noise level is A sound pressure level. Working pressure refers to the dynamic pressure measured at the product inlet when the product is idling. Tightening bolt capacity refers to standard torque that meets the specifications of DIN267 grade 8.8 bolts